Oxidation and oxygenation
SolarOxy-3C
SolarOxy-3C is engineered within the Oxy treatment technology platform. Oxy treatment products are used for oxidation, oxygen delivery, disinfection and environmental remediation. The process is engineered around pollutant demand, reaction kinetics, pH, contact time and the solids or by-products that must be managed after reaction.
Official manufacturer document, hosted in the Watch Water UAE library.
UAE B2B supplyFor water-treatment companies, OEMs and project integrators
Watch Water product familyOxy treatment
Product referenceSOLAROXY-3C
Product role
Where SolarOxy-3C fits in the treatment train.
The treatment route is engineered around the oxidation demand, COD/BOD, target compounds, reaction time, pH, solids separation and the required final-water quality.
Watch Water UAE supports professional customers with product selection, project quantities, commercial quotations and coordination of the technical information required for final design.
01 / Technical profile
Treatment scope and process sequence.
The complete product information is presented here on Watch Water UAE. No manufacturer-site handoff is required.
Product technical data
- Treatment format
- Product-specific oxidation, oxygenation or catalytic reaction
- Application mode
- Batch, continuous, in-pipe, lagoon or process-reactor duty
- Process endpoint
- Target pollutant, COD/BOD, odour, colour or microbiological result
- Design basis
- Demand testing, pH, mixing, contact time and solids separation
Reference information for early project selection. Final limits, certifications and product documentation are confirmed by Watch Water UAE for the specific quotation and intended use.
Typical treatment targets01 02 03 04 05 06
Odour and sulphide oxidation
Bacteria and virus control
Ammonia and inorganic oxidation
Lagoon and aquaculture oxygenation
Difficult wastewater and leachate
How the process is integrated
- 01
Measure
Characterise pollutant load, COD/BOD, pH, solids, target compounds and the required endpoint.
- 02
Apply
Introduce the selected oxidation or oxygenation product at the designed location and dose.
- 03
React
Provide mixing, contact time and process conditions for the intended oxidation pathway.
- 04
Separate
Remove precipitated or oxidised material and verify the treated-water result before discharge or reuse.
02 / Characteristics
Key product characteristics
Technical performance must be confirmed against the actual water matrix and operating conditions.
Advanced oxidation routes
Products for difficult waste streams
Scalable project concepts
Application-specific reaction design
03 / Applications
Typical professional applications
These are common starting points, not a final process guarantee. Watch Water UAE reviews each project before commercial supply.
01Wastewater polishing and reuse
02Odour and colour reduction
03Lagoons and aquaculture
04Disinfection and environmental remediation
Project engineering
Data required for a reliable recommendation.
Capacity, vessel sizing, dose, replacement interval and commercial quantity cannot be set from the product name alone.
- 01Current laboratory water analysis
- 02Target treated-water quality
- 03Design and peak flow rate
- 04Daily operating hours and annual duty
- 05Available vessel size, pressure and backwash flow
- 06Upstream and downstream treatment stages
Product questions
Technical answers for project teams.
These answers support early-stage selection. Final guarantees and operating limits are confirmed against the project data.
01Is oxidation the same as filtration?
No. Oxidation transforms contaminants; a downstream filtration or separation stage may still be needed to remove reaction products.
02Can the required dose be estimated from COD alone?
COD is useful but not sufficient. Pollutant type, pH, competing demand, reaction time and target endpoint also affect dose.
03Can Oxy products be used before biological treatment?
Potentially, but residual oxidant and toxicity to the biological process must be evaluated during design.
04Is pilot testing recommended?
Yes for complex wastewater, leachate, colour, odour and multi-contaminant duties where reaction demand is uncertain.
Watch Water UAE
Discuss SolarOxy-3C for your next treatment project.
Send the water analysis and design flow for a technically grounded B2B quotation.